Hdprepez Utility; Using The Hdprepez Utility; Speedstep Applet; Application And Driver Cd - NEC Versa FXi Series Service And Reference Manual

HDPREPEZ Utility

The HDPREPEZ utility automatically configures your NEC Versa system's save-to-file (STF)
area on the hard disk drive.
Note
For more details about the HDPREPEZ utility, see the HDPREPEZ.TXT file in the
NECUTILS/HDPREP directory.

Using the HDPREPEZ Utility

Run the HDPREPEZ utility if you increase the memory capacity in your NEC Versa beyond the
factory installed base memory.
Follow these steps to run the HDPREPEZ utility.
1. Go to Start, Shut Down, Restart the computer in DOS mode.
At the c: prompt, type
2.
A message displays asking you to confirm your command.
3. Press the indicated key to confirm your command.
At the c: prompt, type
4.
\necutils\hdprep directory.
5. Type HDPREPEZ
the newly installed memory.
Power off your system and then power on. A file, large enough to accommodate your
6.
system's memory is created on the hard disk drive.

SpeedStep Applet

Some processors that ship with the NEC Versa FXi notebook computer include the Intel
SpeedStep technology that allows you to customize high-performance computing on your NEC
Versa, optimizing processing speed and conserving battery life.
If your processor is equipped with SpeedStep technology, an icon appears on your taskbar
allowing you to adjust processing properties. However, the default settings are recommended for
optimal performance and battery conservation.

Application and Driver CD

A variety of third-party software applications, drivers, utilities, internet browsers and the NEC
Info Center are provided on the Application and Driver (A&D) CD for the NEC Versa FXi that
ships with your system. Some of the drivers are already installed as part of your operating
system environment. The additional software on the Application and Driver CD lets you take
full advantage of your system resources.
Use the Application and Driver CD to install applications, drivers, utilities, internet browsers,
and the NEC Info Center. Some software applications install their own desktop icon allowing
quick access to the application. You can also access an application through the Start, Programs
menu.
and press
LOCK C: Enter
and press
cd \necutils\hdprep
and press Enter . The utility automatically prepares your NEC Versa for
System Configuration and Setup 2-23
.
to change to the
Enter
®