Setup
Operating Manual 512/532 Version 00.0 - 12/2013
8.3.7
Fitting the oil collection reservoir
Figure 25: Fitting the oil collection reservoir
⑥
(1) - Screw
(2) - Retainer
(3) - Oil line
1. Insert the retainer (2) into the hole in the table plate (6) and
screw in place using 3 screws (1).
2. Screw the oil collection reservoir (5) into the retainer (2).
3. Pug the oil line (3) into the oil collection reservoir (5).
4. Plug the rubber mounts (4) into the table plate (6).
①
②
③
④
⑤
(4) - Rubber mount (in the oil
collection tray)
(5) - Oil collection reservoir
(6) - Table plate
77