DURKOPP ADLER 512 Operating Instructions Manual page 52

②
①
50
Figure 13: Seam appearance example
(1) – Starting point/first stitch
1. Enter the stitch appearance coordinates in MS Excel or a text
editor.
The coordinates are accurate to 0.1 mm and are separated by
a comma.
Important
In a text editor, the last coordinate line must be actively
terminated with a line break so that the cursor is in the next
empty line.
2. Save the file:
• File name: HSR2000 ~ HSR2099
• File format: .CSV
3. Store the file on a USB stick.
Information
It is also possible to create seam appearances using DA-CAD
5000 and save these as CSV files.
(2) – End point/last stitch
Operating Manual 512/532 Version 00.0 - 12/2013
Settings via the software