Loading Software From A Usb Stick - DURKOPP ADLER 512 Operating Instructions Manual

Error message Description
E 9 1 2 Internal error
E 9 1 3 Thread catcher
search error
E 9 1 4 Thread catcher
motor error
56
Possible cause
–
Thread catcher sensor not
responding
Thread catcher motor not
running correctly

5.24 Loading software from a USB stick

ATTENTION
Interrupting the copy process can damage the machine.
Never pull out the USB during the copy process.
Only pull out the USB after the specified copying time.
When a new software version is available, this can be downloaded
from www.duerkopp-adler.com and loaded into the controller via
a USB stick.
Important
The following files must be stored on the USB stick:
• FUYSTS.BT
• LEEYSTS.BT1
• BT1mot
• BT1PAT
Operating Manual 512/532 Version 00.0 - 12/2013
Settings via the software
Remedy
• Notify DA Service
• Main power switch OFF.
• Check the sensor.
• Main power switch OFF.
• Check the motor and
connections.