30
Figure 9: Adjusting the button mount – optional clamp
①
②
(1) – Button mount, left
(2) – Lever
The button should be able to slide lightly into the button mount
and be easy to align.
However, the button must be securely clamped so that it cannot
twist when the sewing material is inserted.
The lever (2) regulates the size of the opening in the button mount.
1. Switch on the sewing machine.
2. Press the Ready button.
Clamp raises, pedal ready for sewing.
3. Press the Ready button.
Clamp remains raised, pedal is disabled.
4. Loosen the knurled screw (3).
5. Open the button amount to the correct distance using the
lever (2).
6. Insert the button.
(3) – Knurled screw
(4) – Button mount, left
Operating Manual 512/532 Version 00.0 - 12/2013
Operation
④
③