DURKOPP ADLER 512 Operating Instructions Manual page 54

52
Saving a seam appearance from the controller to the USB
stick: Value 2
1. Use the +/– Function buttons to set a value of 2.
2. Press the Select button to save the seam appearance to the
USB stick (HSW2001.scv = U01 ~ HSW2010.scv = U10).
3. Press the Select button to confirm the save operation.
 The Function display shows the value ok,the controller
beeps and the seam appearance is now saved.
4. Press the Reset button twice.
Deleting a seam appearance from the controller: Value 3
1. Use the +/– Function buttons to set a value of 3.
2. Press the Select button.
3. Press the Reset button to confirm the deletion.
 Function display shows "----".
Editing a seam appearance / contour test: Value 4
Figure 14: Editing a seam appearance
1. Use the +/– Function buttons to set a value of 4.
2. Press the Select button.
 The Program display shows 1 for the first stitch, the
Function display shows the value for the X axis, the X axis
symbol LED illuminates.
3. Use the +/– Function buttons to set the coordinates of the
st
1 stitch for the X axis.
4. Press the Select button.
 The Y axis symbol LED illuminates, the Function display
shows the value for the Y axis.
Operating Manual 512/532 Version 00.0 - 12/2013
Settings via the software