Assigning The Memory Buttons - DURKOPP ADLER 512 Operating Instructions Manual

Settings via the software
Memory Button
number combi-
nation
P1 P1
P2 P2
P3 P3
P4 P4
P5 P5
P6 P1 + P2
P7 P1 + P3
Operating Manual 512/532 Version 00.0 - 12/2013
Sewing appearance memory button combinations
Memory Button
number combi-
nation
P8 P1 + P4
P9 P1 + P5
P10 P2 + P3
P11 P2 + P4
P12 P2 + P5
P13 P3 + P4
P14 P3 + P5

5.14.1 Assigning the memory buttons

Prerequisite:
• Machine is in programming mode, Ready button LED is off.
1. Press the Memory button and button P2 at the same time.
2. Press the +/– Program buttons to select a memory location.
3. Press the Ready button to confirm the memory location.
4. Select a seam appearance ( 5.4 Selecting the seam
appearance, p. 37).
5. Scale the axes ( 5.5 Scaling the axes, p. 37).
6. Set the speed ( 5.6 Setting the speed, p. 39).
7. Relocating the sewing appearance position:
• Press the Select button until the
X axis symbol LED flashes.
• Press the +/– Function buttons and set the values: –5/+5.
• Press the Select button until the
Y axis symbol LED flashes.
• Press the +/– Function buttons and set the values: –4 /+4.
8. Press the Ready button to confirm the settings.
Memory Button
number combination
P15 P4 + P5
P16 P1 + P2 + P3
P17 P1 + P2 + P4
P18 P1 + P2 + P5
P19 P1 + P3 + P4
P20 P1 + P3 + P5
P21 P1 + P4 + P5
Memory Button
number combination
P22 P2 + P3 + P4
P23 P2 + P3 + P5
P24 P2 + P4 + P5
P25 P3 + P4 + P5
43