System Rear Connection Detail - Optiview DVRTT PRO Series Operation Manual

Chapter II
System rear connection detail (DVRTT PRO SERIES)
1) Video Source Connection
It connects video sources (camera image) to BNC connector via cable.
2) LOOP OUT Connection
BNC connector of LOOP OUT can be used other device‟s input.
Caution : It may cause low quality of picture when connecting unconnected cable from any device
to LOOP OUT BNC.
3) Monitor Connection
CVBS OUT/SPOT : It connects normal CCTV CRT monitor.
S-VHS : It connects monitor that supports S-VHS(S-VIDEO)
VGA : It connects PC monitor or LCD monitor (not supporting DVI)
** Default of video output is designated to CVBS OUT + VGA OUT.
For screen out's conversion, It convert to CVBS OUT only if you press
front panel's DISPLAY button for more then 3 second.
The CVBS OUT's quality will be better If you use CVBS OUT only.
4) Audio Connection
It connects audio source (mic) to audio
input of RCA and connects speaker to
audio output.
5) Network Connection
It supports 10/100 BaseT, connects
Cat5 cable with RJ-45
18