Optiview DVRTT PRO Series Operation Manual page 85

Chapter VI
3
Remote Set Up <Motion (Link Record)>
Pre Record : Sets pre-event recording time. (Max 5 second)
Post Record : Sets post-event recording time. (Max 60 second)
Remote Set Up <Motion (Link Action)>
4
Alarm Time : Sets Alarm output time. (Max 30 second)
Buzzer Time : Sets buzzer output time in DVR. (Max 30 second)
Mail : When motion is detected, the log is sent to the selected e-mail.
Call Back : When motion is detected, the log is sent to the selected IP address.
Log : Item to save Log writing when motion detected.
(It is not recorded on the system Log but used for event search.)
Motion detection function is a mode to detect in accordance with the amount of color
Changes of image. So, please be careful that DVR keeps recording as continuous
motion when the image of camera is blinking caused by light problem or camera
Auto Iris problem.
Link Camera :
Selects which channel to record when
motion is detected on the relevant
channel.
※ Multiple selection possible
Popup Camera :
Selects which channel to Popup when
motion is detected on the relevant
channel.
※ It works when the Popup setting is
„Yes‟ on DVR.
Popup Time :
Sets Popup time
Link Alarm :
Select Alarm to be linked when motion
Is detected.
※ Multiple selection possible
85