Optiview DVRTT PRO Series Operation Manual page 80

Chapter VI
Remote Setup <Spot Monitor>
1 Spot Number: You can select Spot Monitor Channel.
Please choose Spot Monitor number which you want to set.
Enable Spot Sequence: You can choose "Fix" or "Change" of Spot Monitor.
2
YES : Change
NO : Fix
Fixed Camera : If you choose the enable Spot Sequence as "NO", the selected camera‟s
output is fixed.
Sequence Dwell : If you choose the enable Spot Sequence as "YES", the output time for each
channel can be selected.
Sequence Camera : Can be activated when you check "Enable Spot Sequence as ":YES".
3
the output time for each channel can be selected.
1
2
3
80