Safety Precautions - Optiview DVRTT PRO Series Operation Manual

Safety precautions

Failure to follow these instructions could result in serious personal
injury or death.
Failure to follow these instructions could result in personal injury or
property damage.
Notifies user of references to use conveniently.
 Install this equipment avoiding a direct ray of light, heats and moistures.
-Doing not, can result in lowering efficiency, electric shock or fire.
 Do not pull electric wire or do not touch power plug with wet hands.
-Can result in electric shock or fire.
 Do not bend the power cable forcedly or do not press it with heavy materials.
-Can result in electric shock or fire.
 Do not use damaged power cord or loose outlet plug.
-Can result in electric shock or fire.
 Do not use the outlet fully.
-Can result in electronic shock or fire.
 Do not disassemble, repair or convert this product without permission.
-Can result in electric shock or fire. When repair is required, contact the service center.
 Do not open the cover of the product at your convenience or do not insert inductive stick
into the ventilation hole.
-Especially, SMPS is open, so only professional technicians are allowed to work on.
 Do not place equipment on the inclined or uneven plane.
-Can cause lowering of efficiency or malfunction.
 Do not vibrate or shock in operation.
-Can cause out of order with equipment and hard disk (HDD).
 be caution that do not cover the ventilation hole of HDD or put liquid into the equipment.
-may cause out of order of equipment and hard disk drive (HDD)
 Battery Caution : "Risk of Explosion if Battery is replaced by an Incorrect Type.
Dispose of Used Batteries According to the Instructions."
2