Optiview DVRTT PRO Series Operation Manual page 87

Chapter VI
2
Remote Set Up <Sensor (Link Record)>
Pre Record : Sets up pre recording time. (Max 5 second)
Post Record : Sets up post recording time. (Max 60 second)
Remote Set Up <Sensor (Link Action)>
3
Alarm Time : Selects Alarm output time. (Max 30 second)
Buzzer Time : Selects buzzer output time. (Max 30 second)
Mail : When sensor is detected, the log is sent to the selected e-mail.
Call Back : When sensor is detected, the log is sent to the selected IP address
Log : Item to save Log writing when sensor detected
(It is not recorded on the system Log but used for event search.)
Link Camera :
Selects which channel to record when
sensor is detected on the relevant
channel.
※ Multiple selection possible
Popup Camera :
Selects which channel to Popup when
sensor is detected on the relevant
channel.
※ It works when the Popup setting is
'Yes' on DVR.
Popup Time :
Selects Popup time.
Link Alarm :
Selects Alarm to be linked when sensor
is detected.
※ Multiple selection possible
87