Table of Contents
Advertisement
Chapter X
Manager tools
10.1 Load default
Restore default settings. It will take effect when the device is restarted. (IP and gateway are also reset.)
10.2 Update fireware
Update the software. Check whether the date and main board of original software is congruent with update. The
update will fail if they don't have same function.
You can update by use U disc or by network. Stop recording before upgrade.
10.3 Disc management
This function provides storage information list and management for the HDD data. When problem occurs on hard disc,
the system will stop working and warn to restart the machine. Please ask engineers to check.
Format HDD: clear the data in the HDD and format it quickly. Press this key "execute" to confirm. This instruction
refers to selected HDD, and after that all data in it will be deleted.
Data recovery: If something is canceled carelessly, you need to click "data recovery" to restore the data in hard disk.
Input the password (default: 88888888). Click "Back" to cancel the operation; or click "Execute" to restore the data.
Even the data recovered, it might be a little different from the original.
10.4 System log
It will show all logs according to time. You should open this log function in "Basic Config" and then you can write log in.
By checking logs, you can check the operations used before accordingly.
10.5 System information
Check the related information of the device itself.
Page 21/28
Advertisement
Table of Contents
