Optiview DVRTT PRO Series Operation Manual page 91

Chapter VI
Mail : When all installed HDD disks are full, the log is sent to the selected e-mail
Call Back : When HDDs are full, the log is sent to the selected IP address.
Log : Selects to save Log writing when installed HDDs are full.
(It is not recorded on the system Log, but used for event search.)
SMART
3
Enable SMART : Select to use SMART feature.
SMART Function??
It checks the physical errors and observes the HDD disk continuously such as
Temperature, I/O device errors and general conditions of the HDD disk.
Remote Set Up <SMART (Link Action)>
4
Alarm Time : Sets Alarm output time (Max 30 second)
Buzzer Time : Sets Buzzer output time (Max 30 second)
Mail : When smart related problem occurs, the log is sent to the selected e-mail.
Call Back : When problem occurs, the log is sent to the selected IP address.
Log : Selects to save Log writing when smart related problem occurs
(It is not recorded on the system Log but used for event search.)
Popup Camera :
Not available at this moment
Popup Time :
Not available at this moment
Link Alarm :
Selects which alarm to be linked
※ Multiple selection possible
91