Peripheral Bay Backplane; Removing The Peripheral Bay Backplane - Intel SRPL8 Product Manual

Peripheral Bay Backplane

Removing the Peripheral Bay Backplane

See Figure 37.
1. Observe the safety precautions, warnings, and cautions at the beginning of this chapter.
2. Remove SCSI drives from peripheral bay (see "Hot-Swapping a SCSI Hard Drive" on
page 84).
3. Remove peripheral bay (see "Removing the Peripheral Bay" on page 117).
4. Label and disconnect the diskette and CD-ROM power and data cables from the backplane.
5. Remove and save the eight screws that attach the backplane to the peripheral bay.
6. Lift the backplane straight up and away from the peripheral bay.
7. Place the board on a nonconductive, static-free surface, or store it in an antistatic protective
wrapper.
SRPL8 Server System Product Guide 119