7. Position the drive so the plastic slide rails engage in the bay guide rails. Push the drive into the
bay until the slide rails lock in place.
8. Connect a power cable to the drive. The connectors are keyed and can be inserted in only one
way.
9. Connect the data cable to the drive. The connectors are keyed and can be inserted in only one
way.
SRPL8 Server System Product Guide
C
Figure 41. Snap-in Plastic Slide Rails
A.
Tape drive or other removable media device
B.
Tab on slide rail
C. Screws (4)
D. Slide rails (2)
D
A
OM08013
B
127