Fastaddress - Bosch VEZ Series Installation Manual

78 en | Getting Started
10.3.1

FastAddress

FastAddress is an AutoDome Easy II feature that allows the user
to set or change a camera address using the keyboard and on-
screen menus.
There are three (3) FastAddress commands:
–
NOTICE!
If a keyboard is set to a camera number that already has an
address, that camera also responds to this command.
–
–
To set an address for a camera without an address:
1.
2.
3.
4.
F.01U.164.478 | 2.0 | 2010.02
ON-999-ENTER: Displays and programs all cameras
without an address in the system.
ON-998-ENTER: Displays and programs all cameras with or
without an address in the system.
ON-997-ENTER: Displays the current address status of all
cameras in the system simultaneously.
Select the camera number you want to FastAddress. The
system displays the camera number on the keyboard and
the image on the corresponding monitor.
Press #-ENTER (where # is the camera number without an
address).
Press ON-999-ENTER to invoke an on-screen display of
cameras on the system without an address.
Follow the on-screen instructions. You receive an on-
screen confirmation when the FastAddress is complete.
Installation Manual
AutoDome Easy II
Bosch Security Systems, Inc.