Setting Wol - NEC Express5800/R140a-4 User Manual

E-22 Installing Windows Server 2003 x64 Editions

Setting WOL

Refer to the following procedure to enable WOL.
When PROSet is not installed
1.
Start Device Manager.
2.
Point to [Network adapters] and double click [Intel(R) xxxx] to open the adapter
[Properties].
3.
Click [Power management] tab and check in the following items check boxes.
– Allow the computer to turn off this device to save power.
– Allow this device to bring the computer out of standby.
4.
Click [Advanced] tab and point to [Enable PME].
5.
Set the "Enable" in [Value]
6.
Click [OK].
7.
Reboot the system.
When PROSet is installed
1.
Start Device Manager.
2.
Point to [Network adapters] and double click [Intel(R) xxxx] to open the adapter
[Properties].
3.
Click [Power management] tab and check in the following items check boxes.
– Wake On Directed Packet
– Wake On Magic Packet
– Wake on Magic Packet from power off state
NOTE:
already checked in default set.
4.
Click [OK].
5.
Reboot the system.
"Wake On Directed Packet" and "Wake On Magic Packet" is