NEC Express5800/R140a-4 User Manual page 336

8-58 Troubleshooting
There are some cases that an event log is registered as follows when you operate Windows
Server 2003 R2.
Source:
Type:
Event ID:
Description: The IPMI device driver attempted to determine if the system supported an
→ If you use "Hardware Management" which is provided by Windows Server 2003
R2, above-shown event log will be registered.
For more details, refer to "Enabling the Hardware Management Feature bundled in
Windows Server 2003 R2" on the following site.
[NEC Express5800 Web Site]
http://www.nec.co.jp/express/download/W2K3_R2
Cannot install the operating system correctly.
Did you confirm the notes on installing the operating system?
→ See Chapter 6.
The OS presents unstable operation:
Did you update the system?
→ Installing a network drive after installation of the OS may cause unstable
operation. Use the NEC EXPRESSBUILDER DVD to update the system. (See
Chapter 6.)
When any trouble occurred, the system does not run according to the specification of "Restart
automatically":
→ When any trouble occurred on Windows 2003, the system may not restart
automatically even if "Restart automatically" is specified. In such case, restart the
system manually.
IPMIDRV
Error
1001
IPMI BMC device. The driver attempted to detect the presence of the IPMI
BMC by searching the SMBIOS for Type 38 record. But either no record
was found or the record was not compatible with the version of the device
driver.
If a SMBIOS Type 38 record was detected, the Dump Data field of the
event contains a binary representation of the record.