Sleep
The POWER/SLEEP switch allows you to save almost all power of the server (power-saving mode
or sleep mode).
NOTE:
is required. (Available in Windows Server 2003)
Provide setting for power saving on operating system, then press the POWER/SLEEP switch on the
front of the server to place the server in the power-saving mode. (The POWER/SLEEP LED blinks.)
In the power-saving mode, the server retains the memory data and the status of the previous
operations.
To resume the original state, press the POWER/SLEEP switch. (It may take a little time to resume
the original state.)
NOTE:
the OS in use. (Available in Windows Server 2003.)
IMPORTANT:
the power-saving mode or in the power-saving mode. Otherwise, you
may fail to resume the original state.
To use the SLEEP switch, an OS supporting the sleep feature
The operational level in the power-saving mode depends on
Do not change system configuration while turning into
General Description 2-25
POWER/SLEEP LED
POWER/SLEEP switch