Setting Wol; Graphics Accelerator Driver - NEC Express5800/R140a-4 User Manual

Setting WOL

Refer to the following procedure to enable WOL.
1.
Start Device Manager.
2.
Point to [Network adapters] and double click [Intel(R) xxxx] to open the adapter
[Properties].
3.
Click [Power management] tab and check in the following items check boxes.
– Wake On Directed Packet
– Wake On Magic Packet
– Wake on Magic Packet from power off state
NOTE:
already checked in default set.
4.
Click [OK].
5.
Reboot the system.

Graphics Accelerator Driver

The standard graphics accelerator driver installed by "Update NEC Express5800 system" is
automatically installed.
The following is the procedure when it is necessary to install manually.
1.
Insert the NEC EXPRESSBUILDER DVD into the optical disk drive.
2.
Click Start menu, point to [Programs], [Accessories] and click [Windows Explorer].
3.
Run "install.bat" in the following directory.
– Windows Server 2008 64-bit (x64) Editions:
001\win\winnt\ws2008x64\video\install.bat
– Windows Server 2008 32-bit (x86) Editions:
001\win\winnt\ws2008\video\install.bat
4.
Follow the message to continue the installation.
If the dialog message "Digital Signature could not been found." appears, select [Yes] to
continue.
5.
Remove the NEC EXPRESSBUILDER DVD from the optical disk drive, follow the
direction on the screen and restart the system.
"Wake On Directed Packet" and "Wake On Magic Packet" is
Installing Windows Server 2008 D-23