NEC Express5800/R140a-4 User Manual page 128

4-30 Configuring Your Server
Option
DHCP
HTTP
HTTP Port
Number
HTTPS
HTTPS Port
Number
Telnet
Telnet Port
Number
SSH
SSH Port Number
Clear BMC
Configuration
IMPORTANT:
Executing "Load Setup Defaults" in BIOS SETUP utility does not
restore the default value for settings related to management LAN of
BMC. To restore the default value, you need to execute Clear BMC
Configuration.
It takes about several tens seconds until initialization completes
after execution of Clear BMC Configuration.
Executing Clear BMC Configuration also clears settings made in
NEC DianaScope. Before execution, be sure make backup copy of
setting information of NEC DianaScope.
NOTE:
BIOS SETUP does not save the settings you have made in BMC LAN
Configuration menu.
Parameter
[Disabled]
Enabled
[Disabled]
Enabled
[80]
[Disabled]
Enabled
[443]
[Disabled]
Enabled
[23]
[Disabled]
Enabled
[22]
[Enter]
Notes on performing Clear BMC Configuration
Executing [Save Custom Defaults/Load Custom Defaults] of
Description
Set to [Enabled] to obtain an IP
address from DHCP server
automatically. If you intend to specify
an IP address manually, set to
[Disabled].
Set to [Enabled] to use HTTP
communication for Web interface.
Specify the TCP port number which
the management LAN uses for HTTP
communication.
Set to [Enabled] to use HTTPS
communication for Web interface.
Specify the TCP port number which
the management LAN uses for HTTPS
communication.
Set to [Enabled] to use Telnet
communication as a command line
interface.
Specify the TCP port number to be
used for Telnet communication.
Set to [Enabled] to use SSH
communication as a command line
interface.
Specify the TCP port number to be
used for SSH communication.
Press Enter and select "Yes" to
initialize the BMC configuration.
Your Setting
[ ]: Factory-set