【Enter Setup】
ITF-14
ITF-14 is a special kind of Interleaved 2 of 5 with a length of 14 characters and the last character as the check character. By
default, ITF-14 is disabled.
ITF-14 priority principle: For the Interleaved 2 of 5 barcodes with a length of 14 characters and the last character as the
check character, the ITF-14 configurations shall take precedence over the Interleaved 2 of 5 settings.
An example of the ITF-14 priority principle: when ITF-14 is enabled and Interleaved 2 of 5 is disabled, the
scanner only decodes Interleaved 2 of 5 barcodes with a length of 14 characters and the last character as
the check character.
**【Exit Setup】
【Restore the Factory Defaults of ITF-14】
**【Disable ITF-14】
【Enable ITF-14, Do Not Transmit Check Digit】
【Enable ITF-14, Transmit Check Digit】
62