ITF-14
ITF-14 is a special kind of Interleaved 2 of 5 with a length of 14 characters and the last character as the check character.
ITF-14 priority principle: Forthe Interleaved 2 of 5 barcodes with a length of 14 characters and the last character as the
check character, the ITF-14 configurations shall take precedence over the Interleaved 2 of 5 settings.
Restore Factory Defaults
Enable/Disable ITF-14
** Disable ITF-14
Enable ITF-14 and Transmit Check Character
An example of the ITF-14 priority principle: when ITF-14 is enabled and Interleaved 2 of 5 is disabled, the
scanner only decodes Interleaved 2 of 5 barcodes with a length of 14 characters and the last character
as the check character.
121
Restore the Factory Defaults of ITF-14
Enable ITF-14 But Do Not Transmit Check Character
Enter Setup
** Exit Setup