Chapter 6 Barcode Parameter Setup; Introduction; Code 128; Restore Default Value - Newland NLS-HR15XX-3E User Manual

Introduction

Every kind of barcode has its own special character; the customer can adjust the scanner to suit the character changes by
the setup barcode introduced in this chapter. The customer can also forbid the scanner to read the barcode types which
are not used in order to enhance its working performance.

Code 128

Restore Default Value

By reading the barcode, the parameter setup of Code 128 will be restored to the factory default state.

Allow to Read Code 128 or not

Allow to Read Code 128
Note:the scanner will become unable to read Code 128 by reading the setup barcode ―Prohibit Reading Code 128‖, thus, if
the scanner is unable to read the Code128, please try to read the setuo barcode ―allow to read code 128‖.

Code ID Setup

To activate the setup function by reading ―CodeID setup‖, then read the hexadcimal value inaccordance with the character
which will be set to the CodeID.
40

Chapter 6 Barcode Parameter Setup

Restore the Default Setup Value of Code 128
Prohibit Reading Code 128
【Start Setup】
【Exit Setup】