Telephoning; Incoming Calls; Rejecting Incoming Calls; Handsfree - ASCOM Eurit 33 Operating Instructions Manual

Telephoning

Incoming calls

Incoming calls are signalled by the user's own set ringing melody, in order to acoustically
distinguish between calls for different users.
The display shows the caller's number provided Calling Line Identification Presentation is active
or the number is available. If the number is stored in the phonebook, the name is automatically
displayed. The name on the left of the display shows which user is being calls.

Rejecting incoming calls

0551234567
John
0551234567
êfiTAM
21.01.99
The lower display line offers you further options:
– êfiTAM (Forward call to TAM)
– forward (Forward call to another number, see »Advanced features«).

Handsfree

If you wish to conduct a call without using the handset, you can talk into the microphone of
your Eurit 33 / 33 plus and listen to your call partner over the loudspeaker.
During the call press the loudspeaker key and hold down until you have replaced
the handset.
You can hear your call partner in the handset as well as through the loudspeaker.
Replace the handset and release the loudspeaker key.
Handsfree operation is activated.
If you wish to continue the call on the handset, lift the handset.
Œ
accept @
Œ
reject @
13:55 Œ
∏1(1) @
If you do not wish to answer an incoming call:
Press the Foxkey under @ until »reject«
appears in the lower display line.
Press Foxkey under »reject«.
The call is rejected and the caller's number is
stored in the caller list.
15