Display On Setup; Positioning The Telephone; Preparing The Write-On Labels - ASCOM Eurit 33 Operating Instructions Manual

Setting up the telephone

Display on setup

Once you have connected your Eurit 33 / 33 plus the display shows the prompt: »Bitte geben
Sie mindestens eine MSN (Mehrfachrufnummer) mit Bezeichnung ein«. (Please enter at least
one MSN (Multiple Subscriber Number) with code).
To be able to use all the functions of your Eurit 33 / 33 plus, you must define at least one user
(i.e. enter at least one Multiple Subscriber Number [MSN]).
The detailed procedure for setting a user is described under »User setup«
If you wish to use the telephone first and define a user later:
1 2 3
Dial: 0551234567_
4 5 6
7 9
0
21.01.99
Do not forget to define at least one user later, to ensure full functionality of your Eurit 33
(see »User setup«).

Positioning the telephone

Your telephone is designed for use under normal conditions. Modern furniture is coated with a
wide range of varnishes and plastics and treated with a variety of different finishes and polishes.
Some of these agents may contain ingredients that corrode and soften the plastic pads of the
telephone. If this happens, it may lead to undesirable marks on the furniture surface.
Understandably, the manufacturer cannot accept any liability for such damage.
We therefore recommend that you position your telephone on a non-slip mat, especially if it is
placed on new or varnished furniture.

Preparing the write-on labels.

Turn over the printed write-on label for speed-dial numbers or cut out a label from the back of
the operating instructions. The label for your own telephone number is also located at the back
of the operating instructions.
If you already know which speed-dial numbers you wish to store, note the associated numbers
or functions on the write-on label for speed-dial numbers. Enter your own number(s) and
emergency numbers on the write-on label for your telephone number.
Place the labels in the label recesses (left of the short dialling keys or on the underside of the
handset) and cover them with the transparent panel.
Lift the handset and enter a number.
The number is displayed.
Replace the handset when the call is over.
11:11
Date and time are displayed.
6