Entering The Park Code - ASCOM Eurit 33 Operating Instructions Manual

User settings

Entering the park code

Every user can program his own park code if he wishes to park calls using a code other than the
default code 1.
Settings
MENU
Suppl. services
change
˚CLIR: off
change
Park code: 1
change
Park code: 1
ok
1 2 3
Park code: 34_
4 5 6
ok
7 9
0
Park code: 34
change
Press the menu key until »Settings« is displayed.
Œ
û \
Press the Foxkey under \ until »Suppl.
Œ
services« is displayed.
û \
Press the Foxkey under »change«.
Œ
»CLIR« is shown in the display, followed by
û \
the actual setting »off« or »on«.
Press the Foxkey under \ until »Park code« is
Œ
shown followed by the actual park code.
û \
Press the Foxkey under »change«.
Œ
You can now enter or change the desired park
del
code.
Enter or change the park code. The cursor is po-
Œ
sitioned under the first digit. Use the minus and
del
plus keys to move the cursor. By pressing the
Foxkey under »del« you can delete characters at
the cursor position.
Press the Foxkey under »ok«.
Œ
The new park code for this user is set.
û \
52