Important Information; Show Software Version And Checksum; Pc Dialling Option (Pc Dialer Ii); Software Update - ASCOM Eurit 33 Operating Instructions Manual

Important information

Show software version and checksum

You can show the current software version and checksum of your Eurit 33 / 33 plus as follows:
Installation
MENU
Software
change
Version: D 1.00 NDKT2
Checksum:
execute
Checksum: FAB8
execute
You need to give the software version and checksum when you contact the service
hotline with a problem.

PC dialling option (PC Dialer II)

The Ascom PC Dialer is an add-on for the Eurit 33 / 33 plus that enables Computer Telephone
Integration (CTI).
The software delivered with the PC Dialer II contains a TAPI driver and a program for configuring
the Eurit 33 / 33 plus and downloading phonebook entries from the PC to the Eurit 33 / 33
plus. Calls are then automatically shown on the screen and stored in the PC.
The TAPI driver allows you to connect certain database programs directly to your Eurit 33 / 33
plus.

Software update

You can use the Ascom PC Dialer II to upgrade the Eurit 33 / 33 plus software.
The firmware required for this procedure is downloadable from the Ascom home page (see back
page).
Press the menu key until »Installation« is
û \ displayed.
Press the Foxkey under \ until »Software«
is displayed.
û \
Press the Foxkey under »change«.
The upper display line shows the current
û \
software version.
Press the Foxkey under \.
û \ »Checksum« is shown.
Press the Foxkey under »Execute«.
û \ The checksum is calculated (the procedure
last several seconds) and displayed.
86