Tainet T-288C User Manual page 95

5-8
5.4 V.25bis Auto call Unit
V.25bis auto call unit is used for auto calling in asynchronous and synchronous data
formats.
1. V.25bis Commands
A CRNx
B CRSy
C PRNy;x
D RLN
E CIC
F DIC
2. V.25bis Responses
A INC
B INV
C VAL
D LSN
E CNX
3. V.25bis Call Failure Responses
A CFIET
B CFIAB
C CFIRT
D CFICB
E CFINS
F CFIND
- Call request - dial a phone number (x) entered on DTE
keyboard.
- Call request - dial a phone number stored in specified memory
address (y). y=0-9.
- Program number - store a phone number (x) in specified
memory address (y). y=0-9
- Request list of all stored numbers.
- Connect incoming call. Auto answer enable.
- Disregard incoming call. Auto answer disable.
- Modem detects an incoming call.
- Modem received invalid command entry.
- Modem received valid command entry.
- Modem responses LSN when received RLN command.
- Connection.
- Busy tone had been detected
- Modem aborted a call.
- Ringback timeout.
- Modem busy.
- No phone number is stored.
- No dial tone is detected.
INSTRUCTION SETS