Tainet T-288C User Manual page 68

FRONT PANEL LCD AND MENU-DRIVEN
3.5.11 REMOTE STATUS MENU
ITEM NAME
TX LEVEL= -XX dBm
RX LEVEL= -XX dBm
S/N. RATIO=XX dB
F-SHIFT=X.X Hz
F F-SHIFT=X.X Hz
DELAY=XXXX ms
N ECHO=-XX.X dB
F ECHO=-XX.X dB
DTE=XXXXX ASY 10
RETRAINS=XXXX
RX BAUD=XXXX
TX BAUD=XXXX
RX FREQ=XXXXHz
TX FREQ=XXXXHz
TX POWEROFF=XdB
TR MR RS CS CD T
(tr mr rs cs cd t)
COMMAND
AT%S Transmitted signal level of the remot modem.
AT%S Received signal level of the remot modem.
AT%S Signal to noise ratio of the remot modem.
AT%S Frequency-shift (offset) of the remot modem
AT%S Far end frequency-shift (offset) of the remot
modem.
AT%S Round trip delay time of the remot modem (This
value is provided only when operating on 2-wire
of V32/V.32bis/V.34).
AT%S Near end echo of the remot modem (This value is
provided only when
V32/V.32bis/V.34).
AT%S Far end echo of the remot modem. (This value is
provided only when operating on 2-wire of V.32 /
V.32bis / V.34).
AT%S Indication of speed and data format of DTE of
the remot modem.
Total retrain count of the remot modem.
AT%S Indication of the signalling rate of received signal
of the remot modem. (For V.34 only.)
AT%S Indication of the signalling rate of transmitted
signal of the remot modem. . (For V.34 only.)
AT%S Indication of the carrier frequency of received
signal of the remot modem. (For V.34 only.)
AT%S Indication of the carrier frequency of transmitted
signal of the remot modem. (For V.34 only.)
AT%S Indication of a reduction of transmit power level
of the remot modem. (For V.34 only.)
LED Indication of of the remot modem, as
illustrated below.
TR-DTR On
MR-DSR On.
RS-RTS On.
CS-CTS On.
CD-DCD On.
T-TST On.
DESCRIPTION
operating on 2-wire of
tr-DTR Off.
mr-DSR Off.
rs-RTS Off.
cs-CTS Off.
cd-DCD Off.
t-TST Off.
3-43