Tainet T-288C User Manual page 55

3-30
V34 BAUD RATE
ç
3429
ç
3200
ç
3000
ç
2743
ç
2400
MAKE/BREAK
ç
UK (33.3%)
ç
US (39%)
RING OFF TIME
ç
0..15 SECONDS
CALL-BACK
ç
OFF
ç
ON
CALL-BACK TIME
ç
IMMEDIATELY
ç
1...255 SECONDS
CALL-BACK TEL#
ç
#0...#9
DTMF DURATION
ç
0...255 ms
BACKLIGHT
ç
ON
ç
OFF
ç
AUTO
ATS23=n Selection of V.34 symbol rate and bit rate.
(bit6..4) /Select 3429 baud only. V34 24 bit rate can not be
used. (default)
/Select 3200 baud only. V34 336, 24 bit rate can
not be used.
/Select 3000 baud only. V34 336, 312, 24 bit rate
can not be used.
/Select 2743 baud only. V34 336, 312, 288, 24 bit
rate can not be used.
/Select 2400 baud only. V34 336, 312, 288, 264,
240 bit rate can not be used.
AT&Pn Pulse dial make / break ratio selection.
AT&P1 /33.3\66.7% (default).
AT&P0 /39\61%.
ATS54=n Ring off time. Modem needs to know the ring
interval of the switching system at the remote
location. So as to
answering
*ATDnnnnn = mmm can be used only when the
value is correctly set. (default = 2 sec).
ATS45=n Auto call-back security function.
(bit6) /Disable (default).
/Enable.
ATS53=n Set time waiting for auto call-back.
/(default = 15 sec ).
ATS51=n Phone no. setting for auto call-back function.
(bit7..4) /Group #0 - #9.
ATS11=n DTMF dial duration and interval
/(default = 72 ms )
ATS45=n LCD backlight display & screen change control.
(bit2..1) /Always on.
/Always off and screen changes due to dialing or
any change or new status of the link.
/Backlight is off and LCD display to show the
main manu if no operation within 5 minutes. It
lights when pressing any key, or the link status
changes. Besides, at the same time, the display
show the new status of the link. The backlight shall
keep on and not off automatically in test mode
(default).
FRONT PANEL LCD AND MENU-DRIVEN
correctly
modem pick-up the call or not.
judge that the