Tainet T-288C User Manual page 50

FRONT PANEL LCD AND MENU-DRIVEN
ç V32 48
ç V29 9600
ç V29 7200
ç V29 4800
ç V27 4800
ç V27 2400
ç V26 2400
ç V26 1200
ç V23 1200
ç V23 600
ç V22b 2400
ç V22 1200
ç V21 300
ç BELL 212A
ç BELL 103
ORG/ANS MODE
ç
ORIGINATE MODE
ç
ANSWER MODE
AUTO RETRAIN
ç
ON (FAST)
ç
OFF (SLOW)
TX CLOCK
ç
INTERNAL
ç
EXTERNAL
ç
LOOPBACK
AT%G15 /Set modem speed to V.32 4800 bps QAM.
AT%G14 /Set modem speed to V.29 9600 bps QAM.
AT%G13 /Set modem speed to V.29 7200 bps DPSK.
AT%G12 /Set modem speed to V.29 4800 bps DPSK.
AT%G11 /Set modem speed to V.27bis 4800 bps DPSK.
AT%G10 /Set modem speed to V.27bis 2400 bps DPSK.
AT%G9 /Set modem speed to V.26 2400 bps DPSK.
AT%G8 /Set modem speed to V.26 1200 bps DPSK.
AT%G7 /Set modem speed to V.23 1200 bps FSK.
AT%G6 /Set modem speed to V.23 600 bps FSK.
AT%G5 /Set modem speed to V.22bis 2400 bps QAM.
AT%G3 /Set modem speed to V.22 1200 bps DPSK.
AT%G1 /Set modem speed to V.21 300 bps FSK.
AT%G4 /Set modem speed to BELL 212A 1200 bps
DPSK.
AT%G2 /Set modem speed to BELL 103 300 bps FSK.
ATS14=n Set modem as the originate or answer mode.
(bit7) /For V.34/ V.32/ V.32bis/ V.22bis/ V.22/ V.21/
V.23 / BELL-212A / BELL103 in 2/4-wire FDX
operation. It must be set in different mode on
each side.
AT%En The automatic adaptive equalizer can be re-
adjusted
automatically when the S/N become worse than
the preset threshold.
AT%E0 /High sensitivity, retrain occurs according to S/N
ratio.
AT%E1 /Low sensitivity, retrain occurs according to S/N
ratio.
AT&Xn Select transmit clock source.
AT&X0 /Internal clock source, for most point to point
application.
AT&X1 /External
TDM/STDM network application.
AT&X2 /Received clock source, for used in slave side of
polling nerworks or the modem in the most far
end of a cascading network.
via retrain procedure
clock source, for cascade and
3-25
activated