Tainet T-288C User Manual page 105

A1-6
30 01101010
(106)
31 00010000
(50)
32 0
33 00010110
(22)
34 00010110
(22)
S-REGISTER TABLE FOR T-288C & ITM-3296bis
bit 4 * 0
1
bit 5 * 0
1
bit 6 * 0
1
bit 7
-dBm
bit 4,3,2,1,0
bit 7,6,5,0
Binary
bit 1,0 00
01
* 10
11
bit 2 * 0
1
bit 4,3 00
01
* 10
11
bit 5 * 0
1
bit 6 * 0
1
bit 7 * 0
Binary
bit 7...4 Reserved
bit 3 *0 DTR on dial/andwer accoring to org/ans steup
1 DTR on dial/answer according to ring-incoming
bit 2 *0 nothing
1 Busy out cause by DTR off
bit 1 *0 standard AT&F operation
1 fast AT&F
bit 0 *0 standard ATZoperation off
1 fast ATZ operation off
Sync character 1
Sync character 2
DFB0 Secondary Channel Off
DFB1 Secondary Channel On
DT Tone Dial
DP Pulse Dial
Echo protect tone Off
Echo protect tone On
Reserved
Leased line TX level (from 0..-31dBm)
Dial line TX level (from 0..-15dBm)
\Q0 Flow control none
\Q1 Flow control Xon/Xoff
\Q2 Flow control RTS/CTS
\Q3 Flow control CTS only
\G0 DCE-DCE Flow control off
\G1 CE-DCE Flow control control on
\K0 Break option 0
\K1 Break option 1
\K2 Break option 2
\K3 Break option 3
N0 DCE protocol by DTE speed
N1 BY MODEM negotiation
\B0 Not send break sequence
\B1 Send break sequence
\X0 not pass through
\X1 Xon/Xoff pass through