Tainet T-288C User Manual page 67

3-42
SAVE
/USER PROFILES#0..9
FRONT LOCK
/UNLOCK
/LOCK
PASSWORD EDIT
/ENTER:_ _ _ _
AT&Wn Store the revised configuration in the user-defined
configuration profile.
/Store in the nth group in the user's configuration
profile. Usually, the 0th group is provided for the
working area, setting store in this area or load the
factory default will change the set parameters for
next power-on operation. If you want the nth
group is to be used for the next power-on
working profile, operate the load user profile #n.
Front panel lock control.
/No limitation for any front panel operation
(default).
/Can view the status and current setting of the
modem,but can not make any changes of setting.
For changing password, use left key-L, right key-
R, enter key-E, exit key-X, VO/DA key-V.
The password by the factory are"REEE" (right
moving key, ENTER, ENTER, ENTER). The
global
permanently,and can be used if you forget the
revised password.
FRONT PANEL LCD AND MENU-DRIVEN
password "XVRE" is effective