Tainet T-288C User Manual page 65

3-40
DIAL TO DIAL
ç
OFF
ç
ON
D → L TIMER
ç
FOREVER
ç
1..255 MINUTES
DIAL TO LEASED
ç
MANU
ç
AUTO
BROKEN DISCON.
ç
OFF
ç
ON
4W ECHO CANCEL
ç
OFF
ç
ON
RTRIP-HANDSHAKE
ç
OFF
ç
ON
ECHO CANCELER
ç
SHORT CANCELER
ç
LONG CANCELER
V32b FAST-TRAIN
ç
OFF
ç
ON
ATS41=n When dial line is in use (excluding dial back-up
mode). The line can be restored by auto-redial
after line disconnection.
(bit7) /Disable (default).
/Any
automatically redial to reconnect and provide
similar leased line function through dial line.
ATS28=n When operate in dial back-up mode, to select
how long it will take to detect if the leased line is
recovered or not.
/(default = 60 min.)
ATS27=n Select whether return to leased line automatically
or not during dial back-up mode.
(bit7) /Manual control (default).
/Return to the leased line automatically when
leased line is recovered.
ATS43 = n Broken line detection feature
(bit 4) /Disable (default)
/Enable
ATS43 = n Echo Canceler will be still active in 4w
application of V.32/V.32b/V.34
(bit 5) /Disable (default).
/Enable.
ATS43 = n Round Trip Delay handshaking (for T-288C &
ITM-3296bis only).
(bit 6) /Disable.
/Enable (default).
ATS43 = n Two choice of echo cancelers are provided (for T-
1496 & T-1496terbo only).
/Standard version (default).
(bit 6) /Longer ver. (for round-trip delay >36.833 ms).
ATS43 = n Training sequence selection forV.34/V.32b/V.32
(bit 7) /Normal Training Sequence (default)
/Fast Training Sequence
FRONT PANEL LCD AND MENU-DRIVEN
abnormal line disconnection shall