Tainet T-288C User Manual page 66

FRONT PANEL LCD AND MENU-DRIVEN
3.5.10 PROFILE MENU
ITEM NAME
LOAD
/USER PROFILES#0..9
FACTORY PROFILES
/#0 AS-DL-AT-NONE
/#1 AS-DL-AT-AUTO
/#2 SY-DL-V25-NONE
/#3 AS-2L-ANS-
V34/32b/32t
/#4 AS-2L-ORG-
V34/32b/32t
/#5 SY-2L-ANS-
V34/32b/32t
/#6 SY-2L-ORG-
V34/32b/32t
/#7 SY-4L-ANS-
V34/32b/32t
/#8 SY-4L-ORG-
V34/32b/32t
/#9 SY-4L-V33/V29
/#9 ASY-2L-ANS-REL
COMMAND
This machine provides 20 groups of load
configuration profile.
configuration profile which cover the most
required applications for normal use. The other 10
groups are set by the user which can be revised by
the user before filing for use.
AT&YnZn /User defined load profile #0..#9. Through this
operation, required settings can be made for the
next operation when the modem is power on.
AT&Fn Load factory profile #0..#9.
AT&F0 /Async, dial line, AT command,direct mode and
V32 Adapt, this is a typical operating mode for
Hayes compatible modem ( default ).
AT&F1 /Async, dial line, AT command, Auto reliable
mode, V32 Adapt, this mode is most applicable to
BBS networks.
AT&F2 /Sync, dial line, V.25bis command, V32 Adapt,
this mode is applicable to IBM AS-400 series
sync dial networks.
AT&F3 /Async, 2W leased line, answer, applicable to the
most of the async, non-compressed 2 wire leased
line. (V.34 288 is for T-288C only)
AT&F4 /Async, 2W leased line, originate, applicable to
the most of the Async, non-compressed 2 wire
leased line. (V.34 288 is for T-288C only)
AT&F5 /Sync, 2W leased, answer, applicable to the most
of the Sync, 2 wire leased line. (V.34 288 is for T-
288C only)
AT&F6 /Sync, 2W leased line, originate, applicable to the
most of the Syne, 2 wire leased line. (V.34 288 is
for T-288C only)
AT&F7 Sync, 4W leased line, answer, applicable to the
most of the Sync, 4 wire leased line. (V.34 288 is
for T-288C only)
AT&F8 /Sync, 4W leased line, originate, applicable to the
most of the Sync, 4 wire leased line. (V.34 288 is
for T-288C only)
AT&F9 /Sync, 4W leased line, applicable to V.33/ V.29/
V.27b/ V.26 traditional 4 wire leased line. (for T-
288C and ITM-3296bis only)
/Async, 2W leased line, answer, adaptive speed,
reliable mode and NMP5. (for T-1496/T-1496t)
DESCRIPTION
Among them 10 groups
3-41