Tainet T-288C User Manual page 29

3-4
B. Menu Select
Example 1 :
L MENU Select
STATUS
Description:
1) In top menu, press "ENTER" key to enter this menu.
2) Select "LOCAL"or "REMOTE" first if connected.
3) The character "L" on the upper left corner stands for local.
4) You may use " " and " " keys to select menu.
5) Press "ENTER " key to enter the "MENU".
6) Press "EXIT" key to quit from this menu.
7) Note that status menu is not available before connection.
8) Remote Status menu is not available before connecting and secondary channel
should be set to ON.
C. Menu Screen
Example 1 :
L STATUS
RX Level =-10dBm
Example 3 :
L TEST
LAL
Description :
1) L-Local, R-Remote.
2) Menu name: STATUS, TEST, DIAL.......
3) Status or setting: RX Level=-10dBm, LAL = ON
4) Use " " or " " keys to shift among field; press "ENTER" key to enter the
selected menu.
D. Set-up Menu
Example 1 :
LL TX Level
-10dBm
1) Use " " or " " keys to shift among field, then press "ENTER" key to confirm
and wait for ← appears on the LCD screen.
2) Press "EXIT" key to quit from this menu.
FRONT PANEL LCD AND MENU-DRIVEN
Example 2 :
L MENU Select
TEST
Example 2 :
R CONFIG MODEM
TX clock
Example 4 :
L DIAL
(ON) Dial a number
Example 2 :
R Protocol type
← Auto MNP/V42 ←