Tainet T-288C User Manual page 64

FRONT PANEL LCD AND MENU-DRIVEN
3.5.9 LINE SETUP MENU
ITEM NAME
LINE TYPE
ç
DIAL LINE
ç
2W LEASED LINE
ç
4W LEASED LINE
LEASED TO DIAL
ç
MANU
ç
AUTO
L → D TIMER
ç
FOREVER
ç
1...255 MINUTES
RETRAIN TIMES
ç
DISCONNECT ONLY
ç
1...255 TIMES
BACK-UP TEL#1
ç
#0..#9
BACK-UP TEL#2
ç
NONE
ç #0..#9
BACKUP SPEED
ç
Adapt...V21 300
COMMAND
Select line type and also set dial back-up function.
AT&L0 /Dial line.
AT&L1 /2 wire leased line.
AT&L2 /4 wire leased line.
ATS27=n Auto dial back-up control while leased line is out
of service.
(bit6) /Manual control dial back-up (default).
/Auto dial back-up.
ATS36=n Time period which allows the determination to
force the leased line been disconnected when too
much retrain occurred
within the period set.
/(factory set at 5 minutes).
ATS37=n Count limit of the retrain times to determine line
disconnection (default=10).
Within the set period of L → D timer,once the
counts of retrain times is more than
the default value, the line will be disconnected.
ATS50=n Select the stored phone numbers in the first group
of auto back-up dial.
(bit3..0) /#0..#9
ATS50=n Select the stored phone numbers in the second
group of auto back-up dial.
(bit7..4)
ATS55=n Select modem speed used in the auto dial back-up
mode.
/(default = V.34 288).
DESCRIPTION
3-39