Tainet T-288C User Manual page 52

FRONT PANEL LCD AND MENU-DRIVEN
DYNAMIC RANGE
ç
+4..-33dBm
ç
-4..-43dBm
ç
+3..-26 dBm
ç
-6..-33 dBm
ç
-6..-43 dBm
ç
+3..-40 dBm
LL TX LEVEL
ç
0..-31 dBm
DL TX LEVEL
ç
0..-15 dBm
POWER BACKOFF
ç
ON
ç
OFF
PRE-CODING
ç
ON
ç
OFF
REMOTE CONFIG
ç
S-REG N=XX
ç
LOAD
ç
SAVE
ATS40=n Set receive dynamic range.
(bit7..6) /for T-1496 & T-1496terbo.
/for T-1496 & T-1496terbo (default).
/for T-288C & ITM-3296bis
(V.33/V.29 default).
/for T-288C & ITM-3296bis.
/for T-288C & ITM-3296bis (V.34/V.32bis/V.32
/V.22bis/V.22/V.21/V.23 default)
/for T-288C & ITM-3296bis.
AT%Ln Set leased line transmit level.(TXL)
/default TXL= -8 dBm for 4w L-L. TXL= -10
dBm for 2w L-L.
ATS30=n Set dial line transmit Level, 0..-15 dBm.
(bit7..5) /(default = -10 dBm).
ATS43=n In V.34 operating mode, the remote modem may
request
(power backoff) when a significant amount of
non-liner distortion is detected during line
probing.
(bit3) /Enable
/Disable (default).
ATS45=n In V.34 operating mode, precoding will remove
the effect of noise enhancement in the modem
receive equalizers on lines with attenuation
distortion.
(bit0) /Enable
/Disable (default).
Only available when connected and Secondary
CH. is on.
/read or set remote modem's S-register.
/Command remote modem to load profile.
/Command remote modem to save profile.
reduction in the transmit power level
3-27