Zoneflex 7343 Rear Panel - Ruckus Wireless ZoneFlex User Manual

Introducing the ZoneFlex Access Point
Getting to Know the Access Point Features
Rear Panel
Figure 8 shows the rear panel of the ZoneFlex 7343. For a description of each rear
panel part, refer to Table
Figure 8.

ZoneFlex 7343 rear panel

1
2
Table 11. ZoneFlex 7343 rear panel elements
Number Item Name
1 OPT Button
2 HARD RESET Button Pressing, and then quickly releasing this internal
3 10/100 Ports (2)
4 10/100/1000 PoE
Port
5 Power
11.
3
4
Description
Not active in this model at this time.
button reboots the AP. Pressing and holding it for
six seconds resets the AP to factory default settings.
CAUTION! Resetting the AP to factory default
settings will erase all settings that you configured
previously.
Two RJ-45 ports for 10/100Mbps connections.
One RJ-45 port for a 10/100/1000 PoE (Power over
Ethernet, 802.3af) connection.
Connect the power adapter (12 VDC/1.25A) to this
socket. Power can also be supplied via the 10/100/
1000 PoE (802.3af) port.
5
16