Recommendations - Jandy PureLink Installation And Operation Manual

Page 30

5.6 Recommendations

DO List
• Read and keep your manual in a safe place.
• Increase Chlorine Production before party time and return to normal afterwards.
• Increase Chlorine Production when temperature goes up.
• Increase Chlorine Production when number of guests goes up.
• Use Stabilizer (Cyanuric Acid) to stabilize Chlorine in Pool.
• Mount Power Center in shade or out of the direct sunlight whenever possible.
• Decrease production when temperature goes down (for example, in the Fall and Winter seasons).
• Take pool water sample to Pool Professional once per month.
DON'T List
• Do not get fertilizer in your pool. Fertilizers contain nitrates which cause a high chlorine demand on
pool water.
• Never use dry acid to adjust pH in arid geographic areas with excessive evaporation and minimal
dilution of pool water with fresh water. A build up of by products can damage the electrolytic cell.
• Do not add any pool water balancing chemicals (including salt) unless the AquaPure is turned off.
• Do not let Chlorine Stabilizer drop below 50 PPM.
• Do not add salt without first checking the pool salinity level. Too much salt can disable and possibly
damage the chlorinator.