Section 4. Pool Water Preparation; Determining Pool Size; (M 3 Of Water); Determining Pool Size (Gallons) - Jandy PureLink Installation And Operation Manual

Page 20
Transceiver J-box for PDA
(Pool Digital Assistant)
All Button
Figure 15. Wiring a PureLink Control System Network

Section 4. Pool Water Preparation

ATTENTION INSTALLER: Various application notes (including more detailed
instructions) are available from the Dealer covering installation, operation,
maintenance, and plumbing of the chlorinator system.
4.1 Determining Pool Size (m
• Rectangular Pools
Average length (meters) x average width (meters) x average depth (meters) = m
• Circular Pools
Diameter (meters) x diameter (meters) x average depth (meters) x 0.79 = m
• Oval Pools
Long diameter (meters) x short diameter (meters) x average depth (meters) x 0.79 = m
• Sloping Sides
Multiply total m by 0.85 = m
3
4.2 Determining Pool Size (Gallons of Water in Your Pool)
• Rectangular Pools
Average length (feet) x average width (feet) x average depth (feet) x 7.5 = gallon capacity.
• Circular Pools
Diameter (feet) x diameter (feet) x average depth (feet) x 5.9 = gallon capacity.
• Oval Pools
Long diameter (feet) x short diameter (feet) x average depth (feet) x 5.9 = gallon capacity.
• Sloping Sides
Multiply total gallons by 0.85 = gallon capacity.
or
OneTouch
or
of Water in Your Pool)
3
capacity.
3
Red, 4-Pin
Terminal Bar
RED BLK YEL GRN
4 3 2 1
Test
Switches
Flow
Test Points
Sensor
A to K
R
Aux Board
F ront PCB
R evers e S ide
AquaPure
PureLink
Power Center
capacity.
3
capacity.
3
AquaLink RS
Behind PCB
Support Plate
H S ORP Red BLK YEL GRN
24 VAC AquaLink RS
capacity.
3