Page 1
OPERATION MANUAL ENGLISH | FRANÇES | ESPAÑOL Top Mount Sand Filter Models SFTM22-1.5, SFTM24-2.0 WARNING FOR YOUR SAFETY - This product must be installed and serviced by a contractor who is licensed and qualified in pool equipment by the jurisdiction in which the product will be installed where such state or local requirements exist.
• Water temperature for test must NOT EXCEED 100º F (38º C). • Limit test to 24 hours. After test, visually check system to be sure it is ready for operation. NOTICE: These parameters apply only to Jandy equipment. For non-Jandy equipment, consult the equipment manufacturer. To avoid electrical shock hazard, which can result in serious injury or death: •...
Page 4 ENGLISH Jandy Pro Series Sand Filter SFTM22-1.5, SFTM24-2.0 Installation & Operation Manual ® SECTION 2. PACKAGE CONTENTS 2.1 SFTM22-1.5 Unpack and check contents. If any parts are missing or damaged please call Customer Support at 1-800-822-7933. ITEM DESCRIPTION QTY.
Page 5 Jandy Pro Series Sand Filter SFTM22-1.5, SFTM24-2.0 Installation & Operation Manual ® ENGLISH 2.3 REQUIRED TOOLS/EQUIPMENT The following list of equipment should be present and use the appropriate safety and installation equipment available to the installer at the time of install. Failure to could lead to personal injury or property damage.
Page 6 ENGLISH Jandy Pro Series Sand Filter SFTM22-1.5, SFTM24-2.0 Installation & Operation Manual ® SECTION 4. INITIAL SETUP 4.1 INSTALL BASE 1. Turn filter tank upside down. Position the base so that the retention nodes are between the lock tabs.
Install unions at the filter’s Pump, Return and Waste ports. Remove the plug from the pressure gauge port. • SFTM22-1.5 will use a union adapter at the waste port only. Install pressure gauge. • SFTM24-2.0 will use union adapters at the waste and return ports.
4. Plumb the waste line to the Waste Port on the Multiport Valve. 6. SFTM22-1.5 piping adapters are sized for 1.1/2” PVC pipe, 5. Connect the pipes using the unions supplied with the filter. Do SFTM24-2.0 piping adapters are sized for 2” PVC pipe. In order not use PTFE (plumbers) tape or pipe dope on any union nuts.
Page 9 Jandy Pro Series Sand Filter SFTM22-1.5, SFTM24-2.0 Installation & Operation Manual ® ENGLISH 5.2 INITIAL START UP 1. Make sure that all connections are secure and that any glued 6. Stand clear of filter and turn on the filter pump.
Page 10 ENGLISH Jandy Pro Series Sand Filter SFTM22-1.5, SFTM24-2.0 Installation & Operation Manual ® SFTM22-1.5 AND SFTM24-2.0 PERFORMANCE SFTM24-2.0 FLOW SFTM22-1.5 FLOW FLOW - GPM 5.4 CHANGING THE FILTER SAND Filter sand will need to be removed from the multiport 5.
Page 11 Jandy Pro Series Sand Filter SFTM22-1.5, SFTM24-2.0 Installation & Operation Manual ® ENGLISH 6.2 REPLACEMENT PARTS 6.2.1 SFTM22-1.5 ITEM Part # Description R0744600 Complete Multi-Port Valve w/Clamp Assembly (1.5" MPV) R0744700 Top Rotor Assembly R0745100 Flange Clamp Assembly R0745200 Drain Cap and O-Ring R0745300...
Page 12
Page 12 ENGLISH Jandy Pro Series Sand Filter SFTM22-1.5, SFTM24-2.0 Installation & Operation Manual ® 6.2.2 SFTM24-2.0 ITEM Part # Description R0745700 Complete Multi-Port Valve w/Clamp Assembly (2" MPV) R0745100 Flange Clamp Assembly R0745200 Drain Cap and O-Ring R0746100 Sand Defl ector R0745800 O-ring, Valve/Tank R0746000 Lateral & Standpipe Assembly...
Page 13
Page 13 Jandy Pro Series Sand Filter SFTM22-1.5, SFTM24-2.0 Installation & Operation Manual ® ENGLISH NOTES...
Page 14
Page 14 ENGLISH Jandy Pro Series Sand Filter SFTM22-1.5, SFTM24-2.0 Installation & Operation Manual ® NOTES...
Page 15
Page 15 Jandy Pro Series Sand Filter SFTM22-1.5, SFTM24-2.0 Installation & Operation Manual ® ENGLISH NOTES...
Page 16
Zodiac Pool Systems, Inc. 2620 Commerce Way, Vista, CA 92081 1.800.822.7933 | www.jandy.com Zodiac Pool Systems Canada, Inc. 2115 South Service Road West, Unit 3 Oakville, ON L6L 5W2 1.888.647.4004 | www.ZodiacPoolSystems.ca ZODIAC ® is a registered trademark of Zodiac International, S.A.S.U., used under license.