DataCard SR200 Service Manual page 27

(8) Press [RESET] →
5.1.5 Jam (Transfer)
Card jam in the transfer unit. Remove the jammed card.
Jam (Transfer)
(1) Press [RESET] →
• The card is discharged from the NG card outlet or card
stacker.
5.1.6 Jam (Discharge)
Card jam in the discharge unit. Remove the jammed card.
Jam (Discharge)
(1) Open the printer door.
1-26 (No.HD007<Rev.001>)
to initialize the printer.
93
to initialize the printer.
94
(2) The retransfer film cassette (left side) is taken out, and the
inside of the printer is confirmed.
(3) When the card sticks on the retransfer film, the card is re-
moved.
(4) Close the printer door, and press [RESET] →
tialize the printer.
to ini-