DataCard SR200 Service Manual page 17

(4) Disconnect the two cables from the connectors on the front
board.
Front panel unit
(5) Remove the one screw F attaching the cover.
(6) Press the two tabs, pull up the cover at the point marked
with an arrow, and then remove the cover.
1-16 (No.HD007<Rev.001>)
Connectors
Fig.8
F
Tab Tab Tab Tab
Tab Tab
Cover
Fig.9
(7) Front panel unit with the cover removed.
Fig.10
(8) Disconnecting the cable from the RFID1 board detaches
the front panel unit from the main unit.
RFID1 board
Fig.11
(9) Main unit with the front panel unit removed.
Fig.12
Cover
Cable