Table of Contents
Advertisement
IP Filter
IP Filter - Enable the IP filter and set of allow or deny IP address range to server. Click
Add to list to add the IP range to the IP filter list.
Click Apply or Reset to take effect.
Firmware Upgrade
This feature allows you to upgrade the firmware on your Network Camera. It takes about
few minutes to complete the process. Note that do not power off the Network Camera
during the upgrade.
Upgrade - Click Browse... and specify the firmware file. Click Upgrade. The
Network Camera starts to upgrade and will reboot automatically when the upgrade
completes.
55
Advertisement
Table of Contents
Need help?
Do you have a question about the WFB-100A and is the answer not in the manual?
Questions and answers