Ip Filter; Firmware Upgrade - Brickcom CB-100A series User Manual
Megapixel cube network camera
Hide thumbs
Also See for CB-100A series:
- User manual (96 pages) ,
- Quick installation manual (19 pages) ,
- User manual (85 pages)
Table of Contents
Advertisement
IP Filter
Enable the IP filter and set of allow or deny IP address range to server. Click Add to list to
add the IP range to the IP filter list.
Click Apply or Reset to take effect.
Firmware Upgrade
This feature allows you to upgrade the firmware on your Network Camera. It takes about few
minutes to complete the process. Note that do not power off the Network Camera during the
upgrade.
Upgrade - Click Browse... and specify the firmware file. Click Upgrade. The Network
Camera starts to upgrade and will reboot automatically when the upgrade completes.
- 66 -
Advertisement
Table of Contents
Need help?
Do you have a question about the CB-100A series and is the answer not in the manual?
Questions and answers