Sethttps; Gethttps; Resettodefault; Upgradefirmware - Brickcom WFB-100A User Manual

6.8 setHTTPS

ActionEvent: setHTTPS
Request http://<IP>/cgi-bin/https.cgi
action= set
enabled=
port=
Response
Comment
Method POST

6.9 getHTTPS

ActionEvent: getHTTPS
Request http://<IP>/cgi-bin/https.cgi?action= get
Response enabled=
port=
Comment
Method GET

6.10 resetToDefault

ActionEvent: resetToDefault
Request http://<IP>/cgi-bin/reset.cgi?action= reset
Response
Comment Reset all settings to factory default
Method GET

6.11 upgradeFirmware

ActionEvent: upgradeFirmware
Request http://<IP>/cgi-bin/upgradeFirmware.cgi
action= upgrade
Followed by the IPCam firmware
Response
Comment Upgrade the system firmware upon this request
Method POST

6.12 reboot

ActionEvent: reboot
Request http://<IP>/cgi-bin/reboot.cgi?action= reboot
Response
Comment Reboot the system
Method GET/POST
110