Language; Ip Filter; Firmware Upgrade - Brickcom Fixed Box FB-100A User Manual

Language

Select the desired language from the drop-down menu.
Click Apply to apply settings or Cancel to cancel changes.

IP Filter

The IP Filter is used to filter the IP addresses which are able to access the network
camera. Enable the IP Filter and select to allow or deny a range of IP addresses access
to the server. Click Add to list to add the IP range to the IP filter list.
Click Apply to apply settings or Cancel to cancel changes.

Firmware Upgrade

This feature allows the user to upgrade the camera firmware. It will take a few minutes to
complete the process.
NOTE - Do not power off the camera or camera during the upgrade.
Upgrade - Click Browse... and specify the firmware file. Click Upgrade. The camera
will begin upgrading and will reboot automatically when the upgrade is finished.
79